Overview

Caitian BA-700 is a room temperature curing two-component modified epoxy resin adhesive.

Use

This product is suitable for the bonding of special stones with permeable adhesive.

annex：21-3.jpg

Characteristic

Excellent bond strength; excellent water and alkali resistance; high compressive strength and flexural strength.

product data

Construction instructions

Use a cleaning agent to remove surface oil and keep the surface clean and dry; spray, brush or roll coating; the actual amount is related to the stone size and paving thickness.

Construction Conditions

The ambient temperature is ≥10 °C, the relative humidity is ≤80%, and the surface temperature of the construction workpiece is greater than the dew point temperature of 3 °C; the temperature can be applied at 5-10 °C, but the curing speed will be very slow.

Precautions

Keep the construction environment air circulation; the temperature is lower than 5 °C, construction is prohibited in rainy days or excessive humidity.

Storage: Store in a cool, ventilated place, protected from moisture and sun.

Shelf life: 6 months.

Safety measures

This product must be used by professionals in industrial settings. Please refer to this manual and the health and safety manual when using it. If the customer fails to understand the health and safety knowledge of the product before using this product, please contact us. Effective measures should be taken before construction to prevent skin and eyes from coming into contact with paint (such as work clothes, gloves, goggles, protective masks, etc.). If the product is inadvertently in contact with the skin, wash it thoroughly with warm water and soap. If the eyes are contaminated, rinse with water at least. 10 minutes and seek medical attention immediately. Swallowing is harmful or fatal and should be taken immediately if swallowed. Always take precautions, fire and explosion protection. Residues and old paint buckets should be disposed of in compliance with national or local government safety regulations.

Statement of liability

The company is not responsible for any safety accidents caused by failure to take effective safety measures in accordance with the requirements of the company.

Important statement

The company guarantees the quality of product production. The advice and information provided here is from our independent laboratory and is accurate under controlled conditions, but since we are unable to perform direct and continuous control during the use of the product, whether or not it is provided Recommendations, recommendations, programs and materials, the company does not assume any direct or indirect liability arising from the use of the product.