Overview

Caitian BA-TS800 is a room temperature curing two-component acrylic resin paint.

Use

Suitable for painting and coating on the surface of permeable floors.

Characteristic

Excellent weather resistance, gloss and color retention, can be used outdoors; high mechanical strength, good wear resistance; excellent chemical resistance.

product data

Construction instructions

The construction surface is dust-removed and degreased to keep the surface clean and dry; it can be sprayed, brushed or rolled; the actual amount is related to the construction method and the porosity of the base.

Construction Conditions

The ambient temperature is ≥10 °C, the relative humidity is ≤80%, and the surface temperature of the construction workpiece is greater than the dew point temperature of 3 °C.

Precautions

Keep the construction environment air circulation; the temperature is lower than 5 °C, construction is prohibited in rainy days or excessive humidity.

Storage: Sealed and stored in a cool, ventilated place, protected from moisture, sun, and frost.

Shelf life: 6 months.

Safety measures

This product must be used by professionals in industrial settings. Please refer to this manual and the health and safety manual when using it. If the customer fails to understand the health and safety knowledge of the product before using this product, please contact us. Effective measures should be taken before construction to prevent skin and eyes from coming into contact with paint (such as work clothes, gloves, goggles, protective masks, etc.). If the product is inadvertently in contact with the skin, wash it thoroughly with warm water and soap. If the eyes are contaminated, rinse with water at least. 10 minutes and seek medical attention immediately. Swallowing is harmful or fatal and should be taken immediately if swallowed. Always take precautions, fire and explosion protection. Residues and old paint buckets should be disposed of in compliance with national or local government safety regulations.

Statement of liability

The company is not responsible for any safety accidents caused by failure to take effective safety measures in accordance with the requirements of the company.

Important statement

The company guarantees the quality of product production. The advice and information provided here is from our independent laboratory and is accurate under controlled conditions, but since we are unable to perform direct and continuous control during the use of the product, whether or not it is provided Recommendations, recommendations, programs and materials, the company does not assume any direct or indirect liability arising from the use of the product.