Overview

Caitian BA-601 is a solvent-free three-component self-leveling epoxy floor coating.

Characteristic

1. The coating is automatically leveled and the surface is flat;

2. no seams, no dust, easy to clean the surface;

3. no solvent, environmentally friendly;

4. has excellent decorative effect and excellent scratch resistance;

5. the dense surface can resist the erosion of a variety of chemicals.

Use

Suitable for decoration in specialty stores, showrooms, offices, hotels, schools, home kitchens and commercial building spaces.

Physical parameter

Performance

Construction instructions

Mixing: During storage, Group B may have slight precipitation. Mix well before mixing. B. Pour the components A and B into the mixing tank according to the ratio and stir evenly. Note that it is not allowed to scrape the mixture adhering to the wall of the barrel and the bottom of the barrel when pouring out the mixture, to prevent possible uneven mixing, and then add the group C and stir well.

Construction method

1. Basecoat: Caitian BA-30# epoxy base oil, the reference dosage is about 0.15kg/m2, which should be determined according to the surface condition of the site to achieve uniform film formation;

2, the middle coating: according to the flatness and strength of the base surface, use the color field BA-MB solvent-free intermediate coating to adjust the quartz sand to the required thickness; if there is no thickness requirement, then only need to find the flatness of the unevenness;

3. Top coat: directly spray the BA-601 mixture on the coated coating with a special toothed file, and roll back and forth with the defoaming roller to make the colored sand evenly distributed.

Reference dosage: 3 kg/㎡。

Paint film surface layer thickness: about 2mm.

Tool cleaning: Caitian eight brand epoxy thinner.

Construction conditions: It is recommended to use this product above 10 °C. In order to avoid condensation of water vapor, the construction base surface is required to be dry and clean, the moisture content of the base surface is less than 4%, and the relative humidity of the air is less than 85%. Good ventilation should be maintained during construction and drying in confined spaces.

First paint: first apply epoxy base oil and medium coat.

Add paint: no.

Precautions

1. The environment is required to be clean during construction, and the air is dry and dust-free;

2. During the construction and curing, when the relative humidity of the air is greater than 80%, the surface of the paint film will have back adhesion and loss of light; if the strength of the paint film is no problem, it will not affect the quality of the floor;

3. The circulation of air will affect the drying time;

4. The base oil should be uniformly coated on the base surface. The condition of the base will change the amount of coating, drying time and recoating interval.

Storage: sealed and stored in a cool, ventilated place, protected from moisture, sun, and frost.

Shelf life: 6 months.

Safety

Use this product with care. Swallowing is harmful or fatal. If swallowed, seek medical attention immediately. Skin, eyes should not touch this product. Always take precautions, fire and explosion protection. Residues should be disposed of in accordance with the safety regulations of the relevant national or local government.

Important statement

Caitian Company guarantees the quality of its products. The advice and information provided here is from our independent laboratory and is accurate under controlled conditions, but since we are unable to perform direct and continuous control during the use of the product, whether or not it is provided Recommendations, recommendations, programs and materials, Caitian does not assume any direct or indirect liability arising from the use of the product.

The above information comes from Shenzhen Caitian Chemical Co., Ltd., please indicate the source.