Overview

Caitian BA-148 is a solid two-component epoxy resin coating.

Characteristic

1. Better wear resistance than general solvent-based thin coating materials;

2.the coating is smooth, bright, and fullness;

3. The solvent content is low, which greatly improves the construction environment.

Use

It is suitable for the finishing of parking lot ground, light industrial workshops, workshops, office buildings, warehouses, etc.

Physical parameter

Performance

Construction instructions

Mixing: During storage, Group B may have slight precipitation. Mix well before mixing. B. Pour the components A and B into the mixing tank according to the ratio and mix evenly. The mixed materials should be quickly constructed. The time left in the bucket should not be too long. Note that it is not allowed to scrape the mixture adhering to the wall of the bucket and the bottom of the bucket when pouring out the mixture to prevent possible uneven mixing.

Construction method

1. The base coat: Caitian 30# base oil, the reference dosage is about 0.15kg/m2, which should be determined according to the condition of the surface of the site, and the uniform film formation shall prevail;

2. The middle coating: the flatness and strength of the base surface, using the BA-M epoxy intermediate coating to mix quartz powder (or quartz sand) to the required thickness;

3. Top coat: BA-148 roll is applied to the closed middle coat.

Reference dosage: roll coating twice, 0.15kg/m2 (one time), the amount of two times is 0.22kg/m2.

Paint film surface thickness: about 100um (one pass dry film thickness).

Tool cleaning: Caitian eight brand epoxy thinner.

Construction conditions: It is recommended to use this product above 10 °C. In order to avoid condensation of water vapor, the construction base surface is required to be dry and clean, the moisture content of the base surface is less than 4%, and the relative humidity of the air is less than 85%. Good ventilation should be maintained during construction and drying in confined spaces.

First paint: BA-90# base oil is applied directly to the treated substrate.

Add paint: Caitian eight brand all kinds of medium or top coat.

Precautions

1. The environment is required to be clean during construction, and the air is dry and dust-free;

2. During the construction and curing, when the relative humidity of the air is greater than 80%, the surface of the paint film will have back adhesion and loss of light; if the strength of the paint film is no problem, it will not affect the quality of the floor;

3. The circulation of air will affect the drying time;

4. The base oil should be uniformly coated on the base surface. The condition of the base will change the amount of coating, drying time and recoating interval.

Storage: sealed and stored in a cool, ventilated place, protected from moisture, sun, and frost.

Shelf life: 6 months.

Safety

Use this product with care. Swallowing is harmful or fatal. If swallowed, seek medical attention immediately. Skin, eyes should not touch this product. Always take precautions, fire and explosion protection. Residues should be disposed of in accordance with the safety regulations of the relevant national or local government.

Important statement

Caitian Company guarantees the quality of its products. The advice and information provided here is from our independent laboratory and is accurate under controlled conditions, but since we are unable to perform direct and continuous control during the use of the product, whether or not it is provided Recommendations, recommendations, programs and materials, Caitian does not assume any direct or indirect liability arising from the use of the product.

The above information comes from Shenzhen Caitian Chemical Co., Ltd., please indicate the source.