When I first got a driver's license, I hated going to the underground parking lot of some shopping malls. The steep slope was too slippery. When I was uphill, I turned off the fire when I was uphill. Then I was even more nervous and couldn't go up. I really want to tell the driver behind me that Big Brother wants you to help me drive up, I will help you press it? The pain from a female driver.

How do you want to break the slope? First of all, we have to look at the kind of vibration-free belt. A little faster, the kidneys have to be pushed out, too exciting and too ecstasy.

Then, we need to look at the "added" grit anti-slip floor coating to increase the roughness of the surface of the object and increase the friction.

It is best to prevent water from being worn for a long time.

For everyone, Amway has an epoxy gravel anti-slip floor in our Caitian eight brand, which is especially suitable for the parking lot ramp and the lane section.

Technical indicators:

Project: Epoxy sand grit anti-slip floor

Drying time

Dry surface (h): ≤ 4

Solid (d): ≤24

Compressive strength (mpa): 80

Impact resistance (kg.cm): 50

Flexural strength flexural strength (mpa): 80

Adhesion force (level): 1

Pencil hardness pencil hardness (h): 3

Wear resistance (g): ≤0.03 (750g/1000r weight loss)

Design life: design life: 8-10 years

Construction process:

Base treatment: grinding the base surface, clean and dry

Undercoat: Brush with Caitian ba-30# epoxy base oil roller, reference dosage: about 0.2kg/m2;

Mortar coating: using Caitian ba-m epoxy self-flowing mortar to mix about 1 times quartz sand to the required thickness, reference dosage: 0.8kg/m2.mm;

Sanding layer: Roll coated Caitian ba-148 surface coating once, when the paint is not dry, evenly sprinkle quartz sand (40-60 mesh for slopes, 60-100 mesh quartz sand for driving lanes), reference dosage: 0.15kg /m2;

Top coat: Remove the unfixed floating sand and roll the paint on the color field ba-148 topcoat. Reference dosage: 0.2kg/m2;

Coating thickness: generally 1mm~5mm